Template:Infobox airport/doc

Coordinates: 40°04′48″N 116°35′04″E / 40.08000°N 116.58444°E / 40.08000; 116.58444 (Beijing Capital International Airport)
From The Democratikan Wiki
Revision as of 01:30, 1 September 2023 by wikipedia>Jonesey95 (Fix Linter errors. (fix table))
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Usage

The following blank template includes all of the available parameter names, except for repeating names used for runways and statistics. All parameters except name are optional; however, "IATA: none – ICAO: none", along with the heading "Summary", will always appear. Any unused parameters should be omitted, but can also be left blank if preferred. The use of flag icons with this infobox is discouraged.

<syntaxhighlight lang="wikitext">
Summary
</syntaxhighlight>

Parameters

All parameters except name are optional.

Airport name

These parameters specify the airport name which is displayed at the top of the infobox.

name
The name of the airport in English, such as Warsaw Chopin Airport or Beijing Capital International Airport.
nativename
Airport name in a native language using Western characters (French, German, Spanish, etc.), such as Lotnisko Chopina w Warszawie. In such cases the native name should be in italics, see Wikipedia:Manual of Style/Text formatting#Foreign terms. Can also be used for two different names in the same language (see Region of Waterloo International Airport).
nativename-a
Airport name in a native language with non-Western characters (Chinese, Japanese, Korean, Arabic, etc.), such as 北京首都国际机场.
nativename-r
Use in conjunction with above for Romanized name of the airport, such as Běijīng Shǒudū Guójì Jīcháng. In such cases the Romanized name should be in italics, see Wikipedia:Manual of Style/Text formatting#Foreign terms.

Airport image

These parameters specify an airport photograph or logo which is displayed below the title. A second image can also be displayed below the first image by using the parameter names ending with a "2".

ensign
Optional small ensign
image / image2
The name of image file, such as Airport.png or Logo.gif (do not include the File: or Image: prefix).
image_alt / image2_alt
Alternative text for the images.
image_size / image2_size
image-width / image2-width
The image size or width in pixels, i.e., 175 (defaults to 220 if not specified).
May be used for smaller images which would appear distorted when expanded to a width of 220px.
caption / caption2
Text displayed beneath the image. If left blank or omitted, a caption will not be displayed.
This should only be used for photographs that require an explanation; it should be omitted for airport logos and may be omitted for photographs.

Airport codes

These parameters specify airport location identifiers which are displayed below the image (or below title if there is no image):

IATA
The airport's three character IATA location identifier. If omitted or left blank it will display as IATA: none.
ICAO
The airport's four character ICAO location identifier. If omitted or left blank it will display as ICAO: none.
FAA
The three or four character FAA location identifier for airports in the United States. If omitted or left blank, nothing is displayed.
TC
The three or four character Transport Canada location identifier for airports in Canada. If omitted or left blank, nothing is displayed.
LID
A location identifier for airports outside the US or Canada, if other than ICAO or IATA codes. If omitted or left blank, nothing is displayed.
GPS
A Global Positioning System code for the airport, if other than ICAO or IATA codes. If omitted or left blank, nothing is displayed.
WMO
The World Meteorological Organization five digit code for the weather station at the airport. If omitted or left blank, nothing is displayed.

Airport summary

These parameters specify airport details for the "Summary" section displayed below the airport codes.

type
Airport type should be one of the following: Public, Private, Military or Military/Public. Do not use Commercial, General or Civil.
owner-oper
If the airport is owned and operated by the same entity, use this in place of owner and operator.
owner
Name of the airport owner.
operator
Name of the airport operator, if not the owner.
city-served
If the airport is associated with a major city but actually located in a smaller town, list the major city here and the smaller town under location. This is not automatically linked, in order to allow multiple links if needed.
Example: city-served = Paris
Result: Paris
location
Name of the town or city where the airport is located. Do not put the airport's street address in this field. This is not automatically linked, in order to allow multiple links if needed.
Example: location = [[Orly]], France
Result: Orly, France
opened
The date when the airport originally opened for commercial service.
Example: {{start date|1989|09|22}}
Result: September 22, 1989
closed
The date when the airport closed, either temporarily or permanently, along with reason for closing (for presently closed airports only). Use {{end date}}.
passenger_services_ceased
The date when passenger services to the airport ceased due to conversion of the airport for another use, along with the new use for the airport. Only for airports that previously had passenger services. Use {{end date}}.
hub
If the airport serves as a hub, list the airlines here in alphabetical order. This is not automatically linked, in order to allow multiple links if needed. Use {{Unbulleted list}} if the list is long.
Example:
<syntaxhighlight lang="wikitext"></syntaxhighlight>
Result:
British Airways
EasyJet
Virgin Atlantic
focus_city
If the airport serves as a focus city, list the airlines here in alphabetical order. See discussion at Wikipedia talk:WikiProject Airports#Focus Cities on pages. Use {{Unbulleted list}} if the list is long.
operating_base
If the airport serves as an operating base for an airline, list it here in alphabetical order, unless the airline is already listed under hub or focus_city. This parameter is most commonly used for Ultra-low cost airlines which do not have hubs or focus cities. Use {{Unbulleted list}} if the list is long.
timezone and utc
Will give the time zone that the airport is in, can be linked. A list can be found at List of time zones by country.
Timezone is optional, but if it is used, then utc must be used as well, can be linked. A list can be found at List of UTC time offsets.
summer and utcs
If the time zone observes daylight saving time this will give the zone that the airport is in, can be linked. A list can be found at List of time zones by country.
Summer is optional, but if it is used, then utcs must be used as well, can be linked. A list can be found at List of UTC time offsets.
elevation-f
Height above mean sea level, in feet.
elevation-m
Height above mean sea level, in metres.
website
External link to the airport's official website. See Wikipedia: External links#How to link for more information.
Example: website = {{URL|http://www.dfwairport.com/}}
Result: www.dfwairport.com

Military airports

These optional parameters provide additional information for military airports. The parameter names are based on those used in Template:Infobox military structure. This allows the display of information from that template, without the need to include an additional infobox. See example 4 below.

built
The date when the structure was built, usually given in years.
used
The period during which the structure was in active military use, usually given in years.
commander
The current commanding officer, for structures currently in military use.
occupants
Any notable military units which occupy the structure.

Geographic coordinates

This template allows for the insertion of geographic coordinates in two different ways: you can either provide a complete {{Coord}} template in the coordinates parameter, or you can provide the individual coordinate components (degrees, minutes, seconds, etc.) in the separate parameters described below. The latter method also allows you to insert a pushpin map with an automatically-placed airport icon and label (see below).

If you use both methods, then the coordinates parameter will be used in the infobox.

coordinates
Latitude and Longitude of airport, specified using the {{Coord}} template. When entering the coordinates always ensure that the resultant map or image shows the airport. It is very easy to confuse "N" for "S" or "E" for "W". If used as shown below, this will also cause the airport to appear in Google Earth's Geographic Web Layer.
Example: coordinates = {{Coord|49|27|16|N|002|06|46|E|type:airport_region:FR|display=inline,title}}
Result: Lua error: callParserFunction: function "#coordinates" was not found.

Maps

This template provides three ways to include a map: as a simple image, or using interactive Mapframe maps, or using {{Location map}} (with the coordinate parameters described above to automatically place a pushpin mark and label on a map).

Image map

Am image map can be displayed by providing a value for image_map. The remaining image_ parameters are optional.

image_map
The name of an image to use as a map, such as Airport_map.png (do not include the File: or Image: prefix).
image_mapsize
(optional) The width to display the image map, in pixels. Just the number, no "px". If omitted or left empty, defaults to 220.
image_map_alt
(optional) Alt text for the image map. If left blank or omitted, this defaults to same text used in image_map_caption (or Location of {{{name}}} if no caption).
image_map_caption
(optional) Caption to display below the image map. If left blank or omitted, a caption will not be displayed.

Mapframe maps

  • Basic parameters:
    • mapframe – Specify yes or no to show or hide the map, overriding the default. Default: no
    • mapframe-caption – Caption for the map. Default: blank (or if |mapframe-geomask= is set, "Location in geomask's label")
    • mapframe-custom – Use a custom map instead of the automatic mapframe. Specify either a {{maplink}} template, or another template that generates a mapframe map, or an image name. If used, the subsequent mapframe parameters will be ignored. Default: not specified
    • mapframe-id or id or qid – Id (Q-number) of Wikidata item to use. Default: item for current page
    • mapframe-coordinates or mapframe-coord or coordinates or coord – Coordinates to use, instead of any on Wikidata. Use the {{Coord}} template, e.g. |coord={{Coord|12.34|N|56.78|E}}. Default: coordinates from Wikidata
    • mapframe-wikidata – Set to <syntaxhighlight lang="text" class="" id="" style="" inline="1">yes</syntaxhighlight> to show shape/line features from the wikidata item, if any, when |coord= is set. Default: not specified
  • Customise which features are displayed:
    • mapframe-shape – Turn off display of shape feature by setting to <syntaxhighlight lang="text" class="" id="" style="" inline="1">none</syntaxhighlight>. Use an inverse shape (geomask) instead of a regular shape by setting to <syntaxhighlight lang="text" class="" id="" style="" inline="1">inverse</syntaxhighlight>. Default: not specified
    • mapframe-point – Turn off display of point feature by setting to <syntaxhighlight lang="text" class="" id="" style="" inline="1">none</syntaxhighlight>. Force point marker to be displayed by setting to <syntaxhighlight lang="text" class="" id="" style="" inline="1">on</syntaxhighlight>. Default: not specified
    • mapframe-line – Turn off display of line feature by setting to <syntaxhighlight lang="text" class="" id="" style="" inline="1">none</syntaxhighlight>. Default: not specified
    • mapframe-geomask – Wikidata item to use as a geomask (everything outside the boundary is shaded darker). Can either be a specific Wikidata item (Q-number), or a property that specifies the item to use (e.g. P17 for Lua error in Module:Wd at line 621: attempt to index field 'wikibase' (a nil value). (P17), P131 for Lua error in Module:Wd at line 621: attempt to index field 'wikibase' (a nil value). (P131)). Default: airport
    • mapframe-switcher – set to <syntaxhighlight lang="text" class="" id="" style="" inline="1">auto</syntaxhighlight> or <syntaxhighlight lang="text" class="" id="" style="" inline="1">geomasks</syntaxhighlight> or <syntaxhighlight lang="text" class="" id="" style="" inline="1">zooms</syntaxhighlight> to enable Template:Switcher-style switching between multiple mapframes. Default: not specified
      • <syntaxhighlight lang="text" class="" id="" style="" inline="1">auto</syntaxhighlight> – switch geomasks found in Lua error in Module:Wd at line 621: attempt to index field 'wikibase' (a nil value). (P276) and Lua error in Module:Wd at line 621: attempt to index field 'wikibase' (a nil value). (P131) statements on the page's Wikidata item, searching recursively. E.g. an item's city, that city's state, and that state's country.
      • <syntaxhighlight lang="text" class="" id="" style="" inline="1">geomasks</syntaxhighlight> – switch between the geomasks specified as a comma-separated list of Wikidata items (Q-numbers) in the mapframe-geomask parameter
      • <syntaxhighlight lang="text" class="" id="" style="" inline="1">zooms</syntaxhighlight> – switch between "zoomed in"/"zoomed midway"/"zoomed out", where "zoomed in" is the default zoom (with a minimum of <syntaxhighlight lang="text" class="" id="" style="" inline="1">3</syntaxhighlight>), "zoomed out" is <syntaxhighlight lang="text" class="" id="" style="" inline="1">1</syntaxhighlight>, and "zoomed midway" is the average
  • Other optional parameters:
    • mapframe-frame-width or mapframe-width – Frame width. Default: 270
    • mapframe-frame-height or mapframe-height – Frame height. Default: 200
    • mapframe-shape-fill – Color used to fill shape features. Default: #606060
    • mapframe-shape-fill-opacity – Opacity level of shape fill, a number between 0 and 1. Default: 0.5
    • mapframe-stroke-color or mapframe-stroke-colour – Color of line features, and outlines of shape features. Default: #ff0000
    • mapframe-stroke-width – Width of line features, and outlines of shape features; default is "5". Default: 5
    • mapframe-marker – Marker symbol to use for coordinates; see mw:Help:Extension:Kartographer/Icons for options. Default: airport
      • Can also be set to <syntaxhighlight lang="text" class="" id="" style="" inline="1">blank</syntaxhighlight> to override any default marker symbol
    • mapframe-marker-color or mapframe-marker-colour – Background color for the marker. Default: #5E74F3
    • mapframe-geomask-stroke-color or mapframe-geomask-stroke-colour – Color of outline of geomask shape. Default: #555555
    • mapframe-geomask-stroke-width – Width of outline of geomask shape. Default: 2
    • mapframe-geomask-fill – Color used to fill outside geomask features. Default: #606060
    • mapframe-geomask-fill-opacity – Opacity level of fill outside geomask features, a number between 0 and 1. Default: 0.5
    • mapframe-zoom – Set the zoom level, from "1" (map of earth) to "18" (maximum zoom in), to be used if the zoom level cannot be determined automatically from object length or area. Default: 10
    • mapframe-length_km or mapframe-length_mi or mapframe-area_km2 or mapframe-area_mi2 – Determine zoom level by passing in object's length (in kilometres or miles) or area (in square kilometres or square miles). Default: not specified
    • mapframe-frame-coordinates or mapframe-frame-coord – Alternate latitude and longitude coordinates for initial placement of map, using {{coord}}. Default: derived from item coordinates

Location/pushpin map

A location map can be displayed by providing values for coordinates, and pushpin_map. The remaining pushpin_ parameters are optional.

pushpin_map
The name of a location map as per Template:Location map (e.g. Indonesia or Russia). The |coordinates= parameter values position a pushpin mark and label on the map automatically.
pushpin_mapsize
(optional) The width to display the pushpin map, in pixels. Just the number, without "px". If omitted or left empty, defaults to 220.
pushpin_map_alt
(optional) Alt text for the pushpin map.
pushpin_map_caption
(optional) Caption to display below the pushpin map. If left blank or omitted, a caption will not be displayed.
pushpin_relief
(optional) Any non-blank value (yes, 1, etc.) will cause the template to display a relief map image, where available (see example 1). For additional information, see Template:Location map#Relief parameter.
pushpin_image
(optional) Name of an alternative map image, which must have the same edge coordinates as the location map template specified via pushpin_map (see example 5). Do not include the File: or Image: prefix. For additional information, see Template:Location map#AlternativeMap parameter.
pushpin_label
(optional) The text of the label to place next to the pushpin mark (see example 1). The default is the value of the name parameter.
pushpin_label_position
(optional) The position of the label on the pushpin map relative to the pushpin mark (see example 5). Valid values are left, right, top and bottom. This defaults to either left or right, depending on the coordinates of the marker and its position relative to the right border of the map image.
pushpin_mark
(optional) The name of an image to display as the pushpin mark (see example 5). The default is File:Airplane silhouette.svg ( File:Airplane silhouette.svg ).
pushpin_marksize
(optional) The size of the mark in pixels (see example 5). The default is 10. Do not include px, for example: pushpin_marksize = 8, not pushpin_marksize = 8px.


Infobox control

These parameters control how certain fields within the infobox are displayed.

metric-elev
Set to any value to display elevation in metric units (metres) before imperial/US units (feet); leave blank to display imperial/US units first. This can be seen in example 1.
metric-rwy
Set to any value to display runway length in metric units (metres) before imperial/US units (feet); leave blank to display imperial/US units first. Examples 1 and 2 below show the runway length with metres first; example 3 and 4 show it with feet before metres.

Runways

These parameters specify details for each runway in the "Runways" section displayed below the summary. This can also be used to specify water landing areas for seaplanes (see Fairbanks International Airport). Parameters start with r1- for the first runway, r2- for the second runway, up to r8- for the eighth runway (if more are needed, leave a message on the talk page). Each airport should have at least one runway.

rn-number (r1-number, r2-number, ...)
The designation of the runway, normally two numbers like this → 02/20, 1st number is 18 lower than the 2nd. Where there are parallel runways an additional letter is added to each number, for example "L" for left, "R" for right and "C" for center. In certain cases a runway will only have one number when it can only be used in one direction. For airports in the United States the leading zero is not used and the designation should read 2/20.
rn-length-f (r1-length-f, r2-length-f, ...)
Runway length in feet.
rn-length-m (r1-length-m, r2-length-m, ...)
Runway length in metres.
rn-surface (r1-surface, r2-surface, ...)
Runway surface type, such as: Concrete, Asphalt, Gravel, Grass (or Turf), Dirt, Water, etc. Avoid the generic type "Paved" if possible.

Helipads

These parameters specify details for each helipad in the "Helipads" section displayed below the runways. Parameters start with h1- for the first helipad, h2- for the second helipad, up to h12- for the twelfth helipad (if more are needed, leave a message on the talk page). This section is optional and only appears if the h1- parameters are specified. See example 1 and example 3 below.

hn-number(h1-number, h2-number, ...)
The designation of the helipad. In the United States this is usually the letter "H" followed by a number, i.e. "H1", "H2", etc.
hn-length-f (h1-length-f, h2-length-f, ...)
Helipad length in feet.
hn-length-m (h1-length-m, h2-length-m, ...)
Helipad length in metres.
hn-surface (h1-surface, h2-surface, ...)
Helipad surface type, such as: Concrete, Asphalt, etc. Avoid the generic type "Paved" if possible.

Statistics

These parameters specify details for an optional "Statistics" section displayed below the runways and helipads. Parameters start with stat1- for the first statistic, stat2- for the second statistic, etc. This section only appears if the stat1- parameters are specified. See example 1 and example 3 below.

statn-header (stat1-header, stat2-header, ...)
A brief description of each statistic, such as Passengers or Aircraft operations.
statn-data (stat1-data, stat2-data, ...)
The data associated with the corresponding header.
stat-year
The calendar year for the statistics. This is displayed in parentheses after the word "Statistics" in the section header.

Footnotes

This parameter contains text for footnotes displayed at the bottom of the infobox.

footnotes
The most common use for this field is to give sources or references for the data displayed in the infobox. See the examples below.

Examples

Example 1

Warsaw Chopin Airport

Lotnisko Chopina w Warszawie

Warszawa/Okęcie Airport
Summary
Airport typePublic / Military
OperatorPolish Airports State Enterprise (PPL)
ServesWarsaw
LocationWarsaw (Okęcie), Poland
Opened29 April 1934 (1934-04-29)
Hub for
Elevation AMSL110 m / 362 ft
CoordinatesLua error: callParserFunction: function "#coordinates" was not found.
Websitewww.lotnisko-chopina.pl
Map
Lua error in Module:Location_map at line 411: Malformed coordinates value.
Runways
Direction Length Surface
m ft
11/29 2,800 9,186 Asphalt
15/33 3,689 12,106 Asphalt
Helipads
Number Length Surface
m ft
H1 40 131 Concrete
Statistics (2012)
Passengers9,587,842
Movements118,320
Statistics: Warsaw Chopin Airport<ref name="stats2013">"About the Airport: Statistics". Warsaw Chopin Airport. Retrieved 28 September 2013.</ref>
Sources: Polish AIP at Eurocontrol<ref>"EAD Basic". Ead.eurocontrol.int. Retrieved 2012-06-28.</ref>

Warsaw Chopin Airport

This example shows the appearance of the infobox without an image.

It also shows the use of the parameters for latitude, longitude, and location/pushpin map.

Note: helipad information added to illustrate function of metric-rwy parameter.

<syntaxhighlight lang="wikitext" style="font-size:95%; overflow:auto; margin-right:5px">

Warsaw Chopin Airport

Lotnisko Chopina w Warszawie

Warszawa/Okęcie Airport
Summary
Airport typePublic / Military
OperatorPolish Airports State Enterprise (PPL)
ServesWarsaw
LocationWarsaw (Okęcie), Poland
Opened29 April 1934 (1934-04-29)
Hub for
Elevation AMSL110 m / 362 ft
CoordinatesLua error: callParserFunction: function "#coordinates" was not found.
Websitewww.lotnisko-chopina.pl
Map
Lua error in Module:Location_map at line 411: Malformed coordinates value.
Runways
Direction Length Surface
m ft
11/29 2,800 9,186 Asphalt
15/33 3,689 12,106 Asphalt
Helipads
Number Length Surface
m ft
H1 40 131 Concrete
Statistics (2012)
Passengers9,587,842
Movements118,320
Statistics: Warsaw Chopin Airport<ref name="stats2013">"About the Airport: Statistics". Warsaw Chopin Airport. Retrieved 28 September 2013.</ref>
Sources: Polish AIP at Eurocontrol<ref>"EAD Basic". Ead.eurocontrol.int. Retrieved 2012-06-28.</ref>

</syntaxhighlight>

Example 2

Beijing Capital International Airport

北京首都国际机场

Běijīng Shǒudū Guójì Jīcháng
File:Beijing Capital Departure Hall.jpg
Beijing Capital Departure Hall
Summary
Airport typePublic
OperatorCivil Aviation Administration of China
ServesBeijing
LocationChaoyang District, Beijing
OpenedMarch 2, 1958 (1958-03-02)
Hub forAir China, China Southern Airlines
Elevation AMSL116 ft / 35 m
CoordinatesLua error: callParserFunction: function "#coordinates" was not found.
Websitewww.bcia.com.cn
Runways
Direction Length Surface
m ft
18L/36R 3,800 12,467 Asphalt
18R/36L 3,200 10,499 Asphalt

Beijing Capital International Airport

This example shows the appearance of the infobox with an image and a caption.

It also uses both the nativename-a and nativename-r parameters.

<syntaxhighlight lang="wikitext" style="font-size:95%; overflow:auto; margin-right:5px">

Beijing Capital International Airport

北京首都国际机场

Běijīng Shǒudū Guójì Jīcháng
File:Beijing Capital Departure Hall.jpg
Beijing Capital Departure Hall
Summary
Airport typePublic
OperatorCivil Aviation Administration of China
ServesBeijing
LocationChaoyang District, Beijing
OpenedMarch 2, 1958 (1958-03-02)
Hub forAir China, China Southern Airlines
Elevation AMSL116 ft / 35 m
CoordinatesLua error in Module:Coordinates at line 489: attempt to index field 'wikibase' (a nil value).
Websitewww.bcia.com.cn
Runways
Direction Length Surface
m ft
18L/36R 3,800 12,467 Asphalt
18R/36L 3,200 10,499 Asphalt

</syntaxhighlight>

Example 3

Dallas/Fort Worth International Airport
File:Dfw airport.jpg
Summary
Airport typePublic
OwnerCity of Dallas City of Fort Worth
OperatorDFW Airport Board
ServesDallas–Fort Worth
OpenedJanuary 13, 1974 (1974-01-13)
Hub forAmerican Airlines, Envoy Air
Elevation AMSL607 ft / 185 m
CoordinatesLua error: callParserFunction: function "#coordinates" was not found.
Websitewww.dfwairport.com
Map
Lua error in Module:Location_map at line 411: Malformed coordinates value.
Runways
Direction Length Surface
ft m
13L/31R 9,000 2,743 Concrete
13R/31L 9,301 2,835 Concrete
17C/35C 13,401 4,085 Concrete
17L/35R 8,500 2,591 Concrete
17R/35L 13,401 4,085 Concrete
18L/36R 13,400 4,084 Concrete
18R/36L 13,400 4,084 Concrete
Helipads
Number Length Surface
ft m
H1 158 48 Concrete
Statistics (2005)
Passengers59,176,265
Aircraft operations711,878
Metric tonnes of cargo741,432
Sources: FAA,<ref>FAA Airport Form 5010 for DFW PDF</ref> airport website.<ref>Dallas–Fort Worth International Airport, official web site</ref>

Dallas–Fort Worth International Airport

<syntaxhighlight lang="wikitext" style="font-size:95%; overflow:auto; margin-right:5px">

Dallas–Fort Worth International Airport
File:Dfw airport.jpg
Summary
Airport typePublic
OwnerCity of Dallas City of Fort Worth
OperatorDFW Airport Board
ServesDallas/Fort Worth
OpenedJanuary 13, 1974 (1974-01-13)
Hub forAmerican Airlines, American Eagle Airlines
Elevation AMSL607 ft / 185 m
CoordinatesLua error: callParserFunction: function "#coordinates" was not found.
Websitewww.dfwairport.com
Map
Lua error in Module:Location_map at line 411: Malformed coordinates value.
Runways
Direction Length Surface
ft m
13L/31R 9,000 2,743 Concrete
13R/31L 9,301 2,835 Concrete
17C/35C 13,401 4,085 Concrete
17L/35R 8,500 2,591 Concrete
17R/35L 13,401 4,085 Concrete
18L/36R 13,400 4,084 Concrete
18R/36L 13,400 4,084 Concrete
Helipads
Number Length Surface
ft m
H1 158 48 Concrete
Statistics (2005)
Passengers59,176,265
Aircraft operations711,878
Metric tonnes of cargo741,432
Sources: FAA<ref>FAA Airport Form 5010 for DFW PDF</ref>, airport website<ref>Dallas–Fort Worth International Airport, official web site</ref>.

</syntaxhighlight>

Example 4

Wright–Patterson Air Force Base

File:Air Force Materiel Command.png
File:National Museum of the United States Air Force.jpg
Summary
Airport typeMilitary: Air Force Base
OperatorUnited States Air Force
LocationDayton, Ohio
In use1948 – present
Commander
Elevation AMSL823 ft / 251 m
CoordinatesLua error: callParserFunction: function "#coordinates" was not found.
Websitewww.wpafb.af.mil
Map
Lua error in Module:Location_map at line 411: Malformed coordinates value.
Runways
Direction Length Surface
ft m
5L/23R 12,601 3,841 PEM
5R/23L 7,000 2,134 Asphalt
Sources: FAA,<ref>FAA Airport Form 5010 for FFO PDF</ref> official website.<ref>Wright-Patterson Air Force Base (official site)</ref>

Wright–Patterson Air Force Base

This infobox shows the use of an image and linked text over the blue background in title area. It also makes use of some of the fields used for military airports.

<syntaxhighlight lang="wikitext" style="font-size:95%; overflow:auto; margin-right:5px">

Wright–Patterson Air Force Base

File:Air Force Materiel Command.png
File:National Museum of the United States Air Force.jpg
Summary
Airport typeMilitary: Air Force Base
OperatorUnited States Air Force
LocationDayton, Ohio
In use1948 – present
Commander
Elevation AMSL823 ft / 251 m
CoordinatesLua error: callParserFunction: function "#coordinates" was not found.
Websitewww.wpafb.af.mil
Map
Lua error in Module:Location_map at line 411: Malformed coordinates value.
Runways
Direction Length Surface
ft m
5L/23R 12,601 3,841 PEM
5R/23L 7,000 2,134 Asphalt
Sources: FAA<ref>FAA Airport Form 5010 for FFO PDF</ref>, official website<ref>Wright-Patterson Air Force Base (official site)</ref>.

</syntaxhighlight>

Example 5

Buri Ram Airport

ท่าอากาศยานบุรีรัมย์
Summary
Airport typePublic
ServesBuri Ram, Thailand
Elevation AMSL590 ft / 180 m
CoordinatesLua error: callParserFunction: function "#coordinates" was not found.
Map
Lua error in Module:Location_map at line 411: Malformed coordinates value.
Runways
Direction Length Surface
m ft
04/22 2,100 6,890 Asphalt
Source: AIP Thailand<ref name="AIP">"VTUO – BURI RAM" (PDF). AIP Thailand. Retrieved 20 August 2012.</ref>

Buri Ram Airport

This infobox shows the use optional parameters for the location/pushpin map.

<syntaxhighlight lang="wikitext" style="font-size:95%; overflow:auto; margin-right:5px">

Buri Ram Airport

ท่าอากาศยานบุรีรัมย์
Summary
Airport typePublic
ServesBuri Ram, Thailand
Elevation AMSL590 ft / 180 m
CoordinatesLua error: callParserFunction: function "#coordinates" was not found.
Map
Lua error in Module:Location_map at line 411: Malformed coordinates value.
Runways
Direction Length Surface
m ft
04/22 2,100 6,890 Asphalt
Source: AIP Thailand<ref name="AIP">"VTUO – BURI RAM" (PDF). AIP Thailand. Retrieved 20 August 2012.</ref>

</syntaxhighlight>

References for examples

<references group="" responsive="1"></references>

TemplateData

This is the TemplateData for this template used by TemplateWizard, VisualEditor and other tools. See a monthly parameter usage report for Template:Infobox airport in articles based on its TemplateData.

TemplateData for Infobox airport

TemplateData

No description.

Template parameters

This template has custom formatting.

ParameterDescriptionTypeStatus
Namename

The name of the airport in English

Default
{{PAGENAME}}
Stringoptional
Nativenamenativename

Airport name in a native language using Western characters (French, German, Spanish, etc.)

Stringoptional
Nativename-anativename-a

Airport name in a native language with non-Western characters (Chinese, Japanese, Korean, Arabic, etc.), such as ????????.

Stringoptional
Nativename-rnativename-r

Use in conjunction with above for Romanized name of the airport. In such cases the Romanized name should be in italics.

Stringoptional
Ensignensign

A small ensign using image syntax.

Example
[[File:Example.png|100px]]
Contentoptional
Imageimage

The name of image file, such as Airport.png or Logo.gif (do not include the File: or Image: prefix).

Fileoptional
Image size or widthimage_size image-width

The image size or width in pixels, e.g., 175 (defaults to 220 if not specified).

Default
220
Example
175
Numberoptional
Image alternative textimage_alt

Alternative text for the images.

Stringoptional
Captioncaption

Text displayed beneath the image. If left blank or omitted, a caption will not be displayed. This should only be used for photographs that require an explanation; it should be omitted for airport logos and may be omitted for photographs.

Stringoptional
Image2image2

The name of image file, such as Airport.png or Logo.gif (do not include the File: or Image: prefix).

Page nameoptional
Image2 size or widthimage2_size image2-width

The image size or width in pixels, e.g., 175 (defaults to 220 if not specified). This should only be used for smaller images which would appear distorted when expanded to a width of 220px.

Default
220
Example
175
Numberoptional
Image2 alternative textimage2_alt

Alternative text for the images.

Stringoptional
Caption2caption2

Text displayed beneath the image. If left blank or omitted, a caption will not be displayed. This should only be used for photographs that require an explanation; it should be omitted for airport logos and may be omitted for photographs.

Stringoptional
IATAIATA

The airport's three character IATA location identifier. If omitted or left blank it will display as IATA: none.

Stringoptional
ICAOICAO

The airport's four character ICAO location identifier. If omitted or left blank it will display as ICAO: none.

Stringoptional
FAAFAA

The three or four character FAA location identifier for airports in the United States. If omitted or left blank, nothing is displayed.

Stringoptional
TCTC

The three or four character Transport Canada location identifier for airports in Canada. If omitted or left blank, nothing is displayed.

Stringoptional
LIDLID

A location identifier for airports outside the US or Canada, if other than ICAO or IATA codes. If omitted or left blank, nothing is displayed.

Stringoptional
GPSGPS

A Global Positioning System code for the airport, if other than ICAO or IATA codes. If omitted or left blank, nothing is displayed.

Stringoptional
WMOWMO

The World Meteorological Organization five digit code for the weather station at the airport. If omitted or left blank, nothing is displayed.

Stringoptional
Typetype

Airport type should be one of the following: Public, Private, Military or Military/Public. Do not use Commercial, General or Civil.

Stringoptional
Owner-Operatorowner-oper

If the airport is owned and operated by the same entity, use this in place of owner and operator.

Stringoptional
Ownerowner

Name of the airport owner.

Stringoptional
Operatoroperator

Name of the airport operator, if not the owner.

Stringoptional
city-servedcity-served area-served

If the airport is associated with a major city but actually located in a smaller town, list the major city here and the smaller town under location. This is not automatically linked, in order to allow multiple links if needed.

Stringoptional
Locationlocation

Name of the town or city where the airport is located. Do not put the airport's street address in this field. This is not automatically linked, in order to allow multiple links if needed.

Stringoptional
Openedopened

The date when the airport originally opened for commercial service.

Stringoptional
Closedclosed

The date when the airport closed, either temporarily or permanently, along with reason for closing (for presently closed airports only). Use {{end date}}.

Stringoptional
Passenger Services Ceasedpassenger_services_ceased

The date when passenger services to the airport ceased due to conversion of the airport for another use, along with the new use for the airport. Only for airports that previously had passenger services. Use {{end date}}.

Stringoptional
Hubhub

If the airport serves as an hub, list the airlines here. This is not automatically linked, in order to allow multiple links if needed. Use {{plainlist}} if the list is long.

Stringoptional
Focus Cityfocus_city

If the airport serves as a focus city

Stringoptional
Builtbuilt

The date when the structure was built, usually given in years.

Lineoptional
Usedused

The period during which the structure was in active military use, usually given in years.

Stringoptional
Commandercommander

The current commanding officer, for structures currently in military use.

Stringoptional
Occupantsoccupants

Any notable military units which occupy the structure.

Stringoptional
Timezonetimezone

Will give the time zone that the airport is in, can be linked. A list can be found at List of time zones by country. Timezone is optional, but if it is used, then utc must be used as well, can be linked. A list can be found at List of UTC time offsets.

Numberoptional
UTCutc

UTC time of the airport

Numberoptional
Summersummer

If the time zone observes daylight saving time this will give the zone that the airport is in, can be linked. A list can be found at List of time zones by country.

Stringoptional
UTCSutcs

Summer is optional, but if it is used, then utcs must be used as well, can be linked. A list can be found at List of UTC time offsets.

Stringoptional
Elevation In Feetelevation-f

Height above mean sea level, in feet.

Numberoptional
Elevation In Metreselevation-m

Height above mean sea level, in metres.

Numberoptional
Metric-elevationmetric-elev

Set to any value to display elevation in metric units (metres) before imperial/US units (feet); leave blank to display imperial/US units first.

Numberoptional
Coordinatescoordinates

Latitude and Longitude of airport, specified using the {{Coord}} template

Numberoptional
Websitewebsite

External link to the airport's official website

Stringoptional
Image Mapimage_map

The name of an image to use as a map, such as Airport_map.png (do not include the File: or Image: prefix).

Page nameoptional
Image Mapsizeimage_mapsize

The width to display the image map, in pixels. Just the number, no "px". If omitted or left empty, defaults to 220.

Default
220
Numberoptional
Image Map Alternativeimage_map_alt

Alt text for the image map. If left blank or omitted, this defaults to same text used in image_map_caption (or Location of {{{name}}} if no caption.

Stringoptional
Image Map Captionimage_map_caption

Caption to display below the image map. If left blank or omitted, a caption will not be displayed.

Stringoptional
Pushpin Mappushpin_map

The name of a location map as per Template:Location map (e.g. Indonesia or Russia). The coordinates field position a pushpin mark and label on the map automatically.

Stringoptional
Pushpin Mapsizepushpin_mapsize

The width to display the pushpin map, in pixels. Just the number, without "px". If omitted or left empty, defaults to 220.

Default
220
Numberoptional
Pushpin Map Alternativepushpin_map_alt

Alt text for the pushpin map.

Stringoptional
Pushpin Map Captionpushpin_map_caption

Caption to display below the pushpin map. If left blank or omitted, a caption will not be displayed.

Stringoptional
Pushpin Reliefpushpin_relief

Any non-blank value (yes, 1, etc.) will cause the template to display a relief map image, where available (see example 1). For additional information, see Template:Location map#Relief parameter.

Stringoptional
Pushpin Imagepushpin_image

Name of an alternative map image, which must have the same edge coordinates as the location map template specified via pushpin_map

Page nameoptional
Pushpin Labelpushpin_label

The text of the label to place next to the pushpin mark. The default is the value of the name parameter.

Stringoptional
Pushpin Label Positionpushpin_label_position

The position of the label on the pushpin map relative to the pushpin mark (see example 5). Valid values are left, right, top and bottom. This defaults to either left or right, depending on the coordinates of the marker and its position relative to the right border of the map image.

Stringoptional
Pushpin Markpushpin_mark

The name of an image to display as the pushpin mark.

Default
Airplane silhouette.svg
Stringoptional
Pushpin Marksizepushpin_marksize

The size of the mark in pixels

Numberoptional
r1-Numberr1-number

The designation of the runway, normally two numbers like this ? 02/20, 1st number is 18 lower than the 2nd. Where there are parallel runways an additional letter is added to each number, for example "L" for left, "R" for right and "C" for center. In certain cases a runway will only have one number when it can only be used in one direction. For airports in the United States the leading zero is not used and the designation should read 2/20.

Numberoptional
r1-Length-In Feetr1-length-f

Runway length in feet.

Numberoptional
r1-Length-In Metresr1-length-m

Runway length in metres.

Numberoptional
r1-Surfacer1-surface

Runway surface type, such as: Concrete, Asphalt, Gravel, Grass (or Turf), Dirt, Water, etc. Avoid the generic type "Paved" if possible.

Stringoptional
Metric-runwaymetric-rwy

Set to any value to display runway length in metric units (metres) before imperial/US units (feet); leave blank to display imperial/US units first

Stringoptional
h1-Numberh1-number

The designation of the helipad. In the United States this is usually the letter "H" followed by a number, i.e. "H1", "H2", etc.

Numberoptional
h1-Length-In Feeth1-length-f

Helipad length in feet.

Numberoptional
h1-Length-Metreh1-length-m

Helipad length in metres.

Numberoptional
h1-Surfaceh1-surface

Helipad surface type, such as: Concrete, Asphalt, etc. Avoid the generic type "Paved" if possible.

Stringoptional
Stat1-Headerstat1-header

A brief description of each statistic, such as Passengers or Aircraft operations.

Stringoptional
Stat1-Datastat1-data

The data associated with the corresponding header.

Stringoptional
Stat-Yearstat-year

The calendar year for the statistics. This is displayed in parentheses after the word "Statistics" in the section header.

Lineoptional
Footnotesfootnotes

The most common use for this field is to give sources or references for the data displayed in the infobox

Stringoptional

Microformat

The HTML markup produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.

Sub-templates

If the place or venue has "established", "founded", "opened" or similar dates, use {{start date}} for the earliest of those dates unless the date is before 1583 CE.

If it has a URL, use {{URL}}.

Please do not remove instances of these sub-templates.

Classes

hCard uses HTML classes including:

  • adr
  • agent
  • category
  • county-name
  • extended-address
  • fn
  • label
  • locality
  • nickname
  • note
  • org
  • region
  • street-address
  • uid
  • url
  • vcard

Geo is produced by calling {{coord}}, and uses HTML classes:

  • geo
  • latitude
  • longitude

Please do not rename or remove these classes nor collapse nested elements which use them.

Precision

When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name= parameter.

Tracking categories